Go-e PRO Electric Vehicle Charging Station for Housing Companies and Businesses 11kW

Go-e Pro MID EV charging station for housing companies or businesses. Charges all electric cars at a maximum power of up to 11kW. Suitable for invoicing in housing companies and for invoicing home charging approved by the tax authorities for e.g. leased cars.

The Go-e Charger PRO with an integrated MID-compliant meter meets the needs of housing companies, company cars and properties for charging at home or in apartment buildings. This fixed charging station, which has all of Go-e's smart features, is also ISO 15118 V2X-ready and Plug & Charge-ready, offering even more charging convenience and efficiency thanks to these features. Charging power: 1.4 kW to 11 kW.

Go-e Charger PRO for smart and cost-effective charging in various use cases. Access rights can be easily assigned to a specific user through RFID identification and authorization. Thanks to MID-compliant energy meters, charging can be invoiced with kWh accuracy, approved by the tax authorities and Tukes, and in accordance with statutory requirements.

Easy installation. The Go-e Charger PRO can be installed in a few simple steps and commissioned in a very short time. Whether indoors or outdoors, in a company parking garage, an underground garage, or at home in front of the house: with IP55 protection, adjustable power cable entry from the rear, bottom, and top, and numerous communication interfaces, it offers maximum flexibility for any location. The Go-e Charger PRO CABLE can be adapted to any parking situation thanks to its 6-meter-long, permanently connected charging cable and Type 2 connector.

Features:

Supplier: Go-e
Distributor item no.:
EFUEL item no.: E650
Fixed charging station: According to standard EN IEC 61851-1:2019
Dimensions (W x H x D): Approx. 18.6 x 29.7 x 9.9 cm
Weight (without charging cable) Approx. 2 kg
Mounting type Wall, stand/pole
Charging cable length 6 m
Cross-section 5 x 6 mm² + 1 x 0.5 mm²
Mains connection cable (determined by installer)
Allowed cable cross-section: 3 x 1.5 mm² - 5 x 10 mm²
Allowed cable diameter: 10 mm - 20 mm
Wiring options: top | bottom | rear
Connection: single- or three-phase
Nominal voltage (MID): 230 V - 240 V (single-phase) / 400 V - 415 V (three-phase)
Nominal frequency: 50 Hz
Nominal current: 16 A (single-phase/three-phase) 32 A (single-phase/three-phase)
Mains voltages: TT / TN / IT

Safety:

DC fault current protection with DC residual current detection and additionally AC residual current detection: 6 mA DC, 20 mA AC (Type A residual current device and miniature circuit breaker must be installed on the building side. Local installation standards must be observed)
IP55: Protection against dirt and water, for continuous outdoor use
Protection class: I
Pollution degree: II
User identification: Can be activated if required. Authentication via RFID or app possible. 1 learned RFID chip included
Input voltage: Phase and voltage test
Switching functions: Control of switching functions
Grounding control: For TT and TN networks (disconnectable grounding control for IT networks - Norgel mode)
Current sensor: 3-phase
Temperature sensor: Charging current adjustment in case of overheating

Communication:

RFID: 13.56 MHz
WiFi: 802.11b/g/n 2.4 GHz / frequency range 2412-2472 MHz
Bluetooth: BLE-ready (2.4 GHz)
Mobile connection: LTE FDD (B1/3/5/7/8/20) / GPRS / EGPRS (GSM 900MHz/GSM-DCS 1800 nMHz)
Ethernet: 10/100 Mbit/s, RJ45 connector, LSA terminals
Digital input: 2 x isolated inputs, max. +/-12 V to PE
Digital output: 1 x fully isolated break contact to support fault isolation or other regulatory requirements. 250 V AC / 30 V DC, 2 A
Network communication: Physical layer according to ISO 15118-3
API: Open and documented local + cloud-HTTP API, Modbus TCP, MQTT
OCPP 1.6 (Json): Communication with backends for smart charging and transaction cost invoicing

Mobile connection:

Mobile interface: At least 5 years free mobile connection.
Option to renew for €12 (incl. VAT) per year.
SIM card type Factory integrated eSIM from go-e (not replaceable).
Activate/deactivate anytime via go-e app or API
Connection type Standard: 4G LTE Cat-1
In case of limited reception: 2G / EDGE
Country-specific connection availability: Unlimited mobile connection in all EU countries, UK, Switzerland, Norway and Liechtenstein. Free roaming between these countries
Mobile networks: An overview of the mobile networks used in the above-mentioned countries can be found on the go-e website under Support/FAQ.