DEFA Balancer monitors the power consumption of the property and reports the available power directly to the charging device. It supports both wired and wireless LAN. Includes load management unit, 80A current transformers and wifi antenna. Takes up 2 module slots on the din rail.
Product number: 715004
Manufacturer's warranty: 5 years
Product information:
Product or component type: Current sensor
Product-specific application: Load monitoring
Measurement type: Current
Accuracy: ± 2%
Measurement type: Current L1, L2 and L3
Ambient air operating temperature: -25 °C to +60 °C
Ambient air storage temperature: -30 °C to +70 °C
Connections:
LED
Current transformers:
Product or component type: Current transformer
Maximum current [Imax]: 80 A
Measurement type: 0.333 V
Cord length: Approx. 100 cm
Antenna:
Connector type: SMA male
Connector angle: 90°
Cable length: 1 m
Frequency range: 2.4 GHz or 5 GHz (Wi-Fi)
Communication:
Transmission medium: Radio frequency 2.4 GHz or 5 GHz (Wi-Fi) Ethernet
Antenna connector: SMA female
Safety and security:
Overvoltage category: II
IP protection class: IP20
IK protection rating: IK06
Pollution rating: 2
Relative humidity: 0 … 95% at 55 °C
Equipment category: Class II
Operating altitude: 0 … 2,000 meters
Standards and certifications:
CE
Safety: IEC 61010-1
Radio/EMC: 2014/53/EU – RED
Interface:
Network: TN/IT/TT
Mounting method: DIN rail
Cable entry: 0.2–2.5 mm²
Tightening torque: 0.5 Nm
Supply voltage: 230 V AC, +/- 10 %
Frequency: 50/60 Hz
Consumption: 0.003 A
Recycling:
Electronic waste
With:
DEFA balancer
3 x 80 A current sensors
Wi-Fi antenna
