Skip to product information
1 of 2

autonlataus.com

Go-e PRO electric car charging station for housing associations and companies 22kW

Go-e PRO electric car charging station for housing associations and companies 22kW

Regular price 4.511,00 zł
Regular price 5.159,00 zł Sale price 4.511,00 zł
Sale Sold out
Taxes included. Shipping calculated at checkout.
Quantity

Low stock: 2 left

Go-e Pro MID Electric Vehicle Charging Station for Housing Companies or Businesses. Charges all electric vehicles at a maximum power of up to 22kW. Suitable for billable charging for housing companies and, for example, for billing home charging of lease cars approved by the tax authority.

The Go-e Charger PRO with an integrated MID-compliant meter meets the needs of housing companies, company cars, and properties for charging at home or in apartment buildings. This fixed charging station, equipped with all of Go-e's smart features, is also ISO 15118 V2X-ready and Plug & Charge-ready, offering even greater charging convenience and efficiency through these features. Charging power: 1.4 kW to 11/22 kW.


Go-e Charger PRO for smart and cost-effective charging in various use cases. Access can be easily assigned to specific users via RFID identification and authorization. Thanks to MID-compliant energy meters, charging can be billed with kWh accuracy approved by the tax authority and Tukes, and in accordance with legal requirements.


Easy installation. The Go-e Charger PRO can be installed in a few simple steps and put into operation in a very short time. Whether indoors or outdoors, a company parking garage, an underground garage, or at home in front of the house: with IP55 protection class, adjustable power cable entry from the rear, bottom, and top, and numerous communication interfaces, it offers maximum flexibility for any location. The Go-e Charger PRO CABLE can be adapted to any parking situation thanks to its 6-meter long, permanently connected charging cable and Type 2 connector.

Features:

Supplier: Go-e
Distributor product no.:
EFUEL product no.: E650
Fixed charging station: According to EN IEC 61851-1:2019
Dimensions (W x H x D): Approx. 18.6 x 29.7 x 9.9 cm
Weight (without charging cable): Approx. 2 kg
Mounting method: Wall, stand/column
Charging cable length: 6 m
Cross-section: 5 x 6 mm² + 1 x 0.5 mm²
Mains connection cable (specified by installer)
Allowed cable cross-section: 3 x 1.5 mm² - 5 x 10 mm²
Allowed cable diameter: 10 mm - 20 mm
Wiring options: top | bottom | rear
Connection: single-phase or three-phase
Nominal voltage (MID): 230 V - 240 V (single-phase) / 400 V - 415 V (three-phase)
Nominal frequency: 50 Hz
Nominal current: 16 A (single-phase/three-phase) 32 A (single-phase/three-phase)
Mains voltages: TT / TN / IT


Safety:

DC fault current protection with DC current detection and additionally AC current detection: 6 mA DC, 20 mA AC (A Type A RCD and a miniature circuit breaker must be installed on the building side. Local installation standards must be observed)
IP55: Protection against dirt and water, for continuous outdoor use
Protection class: I
Pollution degree: II
User identification: Can be activated if necessary. Authentication via RFID or app possible. 1 learned RFID chip included
Input voltage: Phase and voltage test
Switching functions: Control of switching functions
Grounding control: For TT and TN networks (disconnectable grounding control for IT networks - Norgel mode)
Current sensor: 3-phase
Temperature sensor: Charging current adjustment in case of overheating


Communication:

RFID: 13.56 MHz
WiFi: 802.11b/g/n 2.4 GHz / frequency range 2412-2472 MHz
Bluetooth: BLE-ready (2.4 GHz)
Mobile connection: LTE FDD (B1/3/5/7/8/20) / GPRS / EGPRS (GSM 900MHz/GSM-DCS 1800 nMHz)
Ethernet: 10/100 Mbit/s, RJ45 connector, LSA terminals
Digital input: 2 x isolated inputs, max. +/-12 V to PE
Digital output: 1 x fully isolated dry contact to support fault isolation or other regulatory requirements. 250 V AC / 30 V DC, 2 A
Grid communication: Physical layer according to ISO 15118-3
API: Open and documented local + cloud-HTTP API, Modbus TCP, MQTT
OCPP 1.6 (Json): Communication with backend systems for smart charging and transaction cost billing


Mobile connection:

Mobile interface: Minimum 5 years free mobile connection.
Option to renew for €12 (incl. VAT) per year.
SIM card type: Factory-integrated eSIM from Go-e (not replaceable).
Activate/deactivate anytime via the Go-e app or API
Connection type Standard: 4G LTE Cat-1
In case of limited reception: 2G / EDGE
Country-specific connection availability: Unlimited mobile connection in all EU countries, UK, Switzerland, Norway, and Liechtenstein. Free roaming between these countries
Mobile networks: An overview of the mobile networks used in the aforementioned countries can be found on the Go-e website under Support/FAQ.

 

View full details

Questions? Contact us!