Installation area 2+20km

Installation in Hanko, Tammisaari, Karja, Lohja, Hyvinkää, Hämeenlinna, Tampere, Turku, Riihimäki, Jyväskylä and Oulu regions

Installation week in the region of Hanko, Tammisaari, Karja, Lohja, Hyvinkää, Hämeenlinna, Tampere, Turku, Riihimäki, Jyväskylä and Oulu, the installation time is agreed separately at least 1 week before installation and may vary by +/- 1 week. Select the desired installation week from the pull-down menu. In the additional installation information, you can put your wish for installation times that suit you. We offer installation at an affordable price because we strive to use the installers' working time efficiently. This means that the installer can install several items in the same area. However, we are always in touch and the exact installation time is agreed separately and we can negotiate it if possible (but we cannot promise any exact time). If the flexible installation mentioned above does not suit you or you want a faster installation, then contact us with the contact form and we will offer you exactly the time you want. We offer competitively.

When installing Wallboxes, we always install a new cable (5x2.5) for the entire distance from the center to the box, as well as a cable protector . If the device does not have a built-in fault current, we will also install the necessary fault currents for the center. If you do not install in your detached house, always ensure permission from the owner of the property (housing company/landlord).

Before installation, make sure:

• You have a permit for installation (Does not apply to the detached house you own. Apartment and terraced houses usually require a permit from the housing association. If you are renting, you must also have a permit from the landlord.)
• You have a place for the Wallbox, where you can also attach the device. The place is a suitable distance for your car and the cable is enough for charging. If the journey is long, long cables are also available, in that case take the A version where the charging station does not have a fixed cable.
• The installation route is clear. You should carefully go through the cable route itself, so that there are no surprises (E.g. that there is nothing in front/on the wall that prevents the installation). If the installation is not successful, e.g. due to the incompleteness of the route, we will charge 30% of the installation price for the additional visit. Naturally, the installation does not involve any kind of excavation work and the route must be such that the cable can be routed from the main center. For safety reasons, the cable cannot run on the ground/floor at all.
• You have enough capacity in the main fuse/electrical connection for the Wallbox you have chosen. It is difficult to give exact numbers without knowing the object, as other electrical devices also affect this (minimum 20A).

You get a household deduction for the installation work .

Installation includes:

• 10 m of proper power cable (usually MMJ 5x2.5). We always install a 3-phase cable, even if the Wallbox is lower in power.
• Installation of devices ready for use
• Driving distance 20 km from the center of your chosen installation location

Note! You can only buy the installation if you order a product from us.

Additional work:

• If the cable length is more than 10m, additional cable installed €10/meter
• If there are no holes in the wall on the planned route, we charge €30/piece for making the holes
• Additional driving €1.90/km including working time used for driving.
• Hourly charge €79/h, if other additional work has to be done.
• Additional installation work will be invoiced afterwards according to the completed work or purchased additional products. In connection with the installation, you can also buy for example mobile chargers or cables from us at an affordable price.