UTU POWEL PIKE PRO 2A2V HYBRID MID Garden socket for heating and charging

PIKE PRO 2T 2A2V HYBRID outdoor box with timer, MID meter

Electric car charging and heating element. Includes: 2*schuko, 2*kWh meter, 2*10A residual current circuit breaker type A, 1*digital clock switch, 2*changeover switch. Charging/heating function selection with changeover switch position-1 CHARGING and position-2 HEATING.

Charging station - EVPIKE PRO 2A2V 2*kWh HYBRID (3452803) with digital clock switch

The EVPIKE PRO HYBRID charging station has a charging or heating function in the same housing. The products have a digital clock switch and toggle switches on both outputs, which allow you to select the desired function, which is charging or heating. The products are well suited for places where it is not known whether charging or heating will be used.
NOTE! kWh meters only measure the energy consumed for charging. kWh meters are MID approved.

- The housing is made of glass-fiber reinforced polycarbonate, which is resistant to large temperature fluctuations, impacts, UV radiation and chemicals.
- Can be mounted on a wall or pole.
- Two housings can be installed back to back on one pole using the same pipe flange (3405001). In this case, the housings must be attached to each other using the hole blanks.
- For electrical connection, the outdoor boxes have a 5x16 mm2 connection plate approved for daisy-chaining.

Contents:
- 2 pcs residual current circuit breaker 10A/30mA
- 2 pcs changeover switch 1-0-2
- 2 pcs kWh meter (MID approved)
- 2 Schuko sockets (can withstand continuous 10A current)
- 1 digital clock switch (2-channel)
- Lock + 2 tokens

The function (1-charging) or (2-heating) can be selected from the charging station's toggle switch.
In position (1-charge), the sockets receive a continuous supply and charging starts automatically when the cable is plugged into the socket.
In position (2-heating), the timer switch is programmed for the desired heating time.

Before installation, ensure that the power supply has sufficient capacity for the station. The device may only be installed by a qualified electrician. The device may be installed indoors or outdoors.

All our products have CE certification.

Ask more about our sales!